Eekay Supreme Synthetic Enamel
Eekay Supreme synthetic Enamel has glossy new look to surfaces painted with this finish. It forms a tough film that is extremely resistant to stains and water, it there by serves as a protective coating around the painted surface. Finish Coat for Machinery Parts, furniture & fixtures. It gives glossy smooth & hard film.
Features
- High gloss Finish.
- Tough and durable coating which can be cleaned with potable water.
| Type | Synthetic Oil Resistant based |
| Colour | Off White, White, Light Biscuit, Light Grey |
| Finish | Eggshell/ Matt |
| Volume Solids | 35 ± 5 % |
| Recommended Thinner | Special thinner |
| Flash Point | > 35 o C |
| Application Method | Brush or spray |
| Drying Time |
|
| Recommended DFT | 30-40 Microns |
| Theoretical Coverage | 10 sq.mtr/ltr at 35 microns |
| Recoatability | 16 -24 hrs |
| Packing | 20 Litres single pack |
| Shelf Life | One year in sealed drums |
| Clean Up | It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
| Safety Precautions | Always paint with small quantity and replace lid after use. Use safety precautions regarding flammability of solvents & paint. |
Direction to use
- Clean the metal surface with sand paper / grinding / blasting.
- Ensure that the surface is free from dirt, grease, oil, loose and unwanted particle.
- Wipe the surface clean with Eekay GP Thinner.
- Apply 2 coats of Eekay Red oxide Primer and allow the coat to dry completely with over night interval.
- Apply 2 coats of Eekay Supreme Synthetic Enamel with 4 to 6 hours of interval.
- Once the container is opened, use within 24 – 36 hours
Mixing
- If settling is observed in the drum, loosen the material with the help of hand stirrer, followed by power driven stirrer if needed.
| Application | Recommended Thinner | Volume of Thinner | Nozzle orifice | Nozzle Pressure |
| Brush / Roller | Eekay GP Thinner | 10% | NA | NA |
| Air Spray | Eekay GP Thinner | 5 - 20% | 1.5 – 3.00 mm | 0.3 – 0.4 MPa |
| Sanding | Light sand with emery paper no 320 and wipe clean. Apply the top coat as per the instructions given above. | |||
Storage and Packing
- Store in cool and dry place.
- Store in accordance to local regulations.
- Shelf life 3 to 4 years from the date of manufacturing as long as the container is sealed and kept in normal temperature.
- Keep the container tightly closed to prevent drying.
- Packing will be made available in 4 and 20 liters pack size.
- For deeper shade apply 1 additional coat.
Safety Information
- As a general measures, inhalation of solvent vapors, contact with eyes should be avoided.
- While application area should be well ventilated.
Special note
- Before painting moister content in the atmosphere and pH value of the surface should be checked properly.
- Low VOC content.