Eekay Zinc Chrome Primer
Eekay Zinc Chrome Primer is based on Alkyd resin and offers fair corrosion resistance. It can be applied by brushing or spraying and offers good opacity, coverage and flow along with level. Eekay Zinc Chrome Primer is one pack, air-drying synthetic primer exhibiting an excellent smooth and uniform finish. It gives excellent adhesion to mild steel and wooden surfaces. After complete curing it gives a tough film which provides a long term protection against mild atmospheric conditions. It is resistant to Hydraulic oil and Transformer oil.
Benefits
- Good anti-settling properties, and offers good opacity
- Excellent adhesion over MS surfaces.
- Suitable for priming ferrous and concrete surface.
Features
- Washable with potable water.
- Excellent resistance to saline, marine and chemical environment.
- Free from lead and chromate containing pigment.
| Color | Yellow |
| Gloss | Matt |
| Volume Solids | Approx 40 – 45 % |
| Recommended DFT | 35 – 40 Microns |
| Theoretical coverage capacity | 10 – 11 sq. mtr/ltr |
| Drying time at 30⁰C |
|
| Over coating interval at 30⁰C |
|
Direction to use
- Surface preparation and substrate condition should be dry and free from all contaminations, surface to be sufficiently roughened prior to priming.
- Surface temperature must be at least 10⁰C and not more than 45⁰C.
- Steel, abrasive blast clean to min Sa 21/2 Swedish method.
- Relative humidity should be below 80%
- Good ventilation is required to ensure proper curing
Mixing
- Stir the Eekay Zinc Chrome Primer to loosen the settled material with hand stirrer followed by power stirrer for quick homogenous mixing.
- Addition of too much thinner will lead to reduced sag resistance.
| Application | Recommended Thinner | Volume of Thinner | Dilution % | Application Viscosity | Recoating |
| Sanding | Sand the surface with emery paper 180 and wipe clean. | ||||
| Application of Eekay Zinc Chrome Primer 1st coat Brush / Spray | Eekay G. P Thinner |
|
0 – 5 % | 40 – 45 Sec | 6 – 8 hours |
| Sanding | Sand the surface with emery paper 180 and wipe clean. | ||||
| Application of Eekay Zinc Chrome Primer 2nd coat Brush / Spray | Eekay G. P Thinner |
|
0 – 5 % | 40 – 45 Sec | 6 – 8 hours |
| Sanding | Light sand with emery paper no 320 and wipe clean. Apply the top coat as per the instructions given above. | ||||
Storage and Packing
- Store in cool and dry place.
- Store in accordance to local regulations.
- Packing will be made available in 1, 4 and 20 liters pack size.
Safety Information
- As a general measures, inhalation of solvent vapors, contact with eyes should be avoided.
- While application area should be well ventilated.
- In case of eye contact wash with plenty of clean water and take medical help if necessary.
- Use protective equipment’s like rubber / polyethylene gloves, safety goggles and face mask while handling the paint.